FR Rainwear

The Helly Hansen FR Hi Visibility Wabush jacket will keep you safe while you are on the job. Compliant with CAN-CGSB 155.20,6.1.1 before and after 50 washes. It meets the requirements for the standard ASTM F2733 and F1891. This men's outerwear is also compliant with CSA Z462, NFPA 70-E, and ATPV 8.6 CAL/CM^2. It has an outer shell that's rated HAF 77.7%, and the orange reflective jacket has an arc rating of 2. Finally, it meets the requirements for the standard CSA Z96, Class 2, level 2, and ANSI/ISEA 107(2010), class 2, level 2.

This Black Insulated FR Ripstop Waterproof Jacket is perfect for wet conditions, Constructed with durable, water proof, wind proof ripstop material. Stay dry while on the job. The matching Bibs can be found here Men's Black Hi-Vis FR Ripstop Waterproof Bibs 024-FR235-LW-BK Durable FR 300 denier rip stop polyester with PU coating for superior water proofingseam sealed and fully waterproof and windproofremovable hood with bungee toggleinside waist adjustment2 way heavy duty zipperinside embroidery access zipperinside pocket, 2 front zip and button pockets with storm flap fleece collaradjustable storm cuffs, FR rating patches on arm and front of jacketdrop back seatHigh Contrast Reflective Tape for Enhanced Visibility and Compliance. This is a superior replacement for the Viking 3907FRJ

This Black Insulated FR Ripstop Waterproof Jacket is perfect for extreme conditions, with a -30 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching Bibs can be found here Men's Black Hi-Vis Insulated -30 FR Ripstop Waterproof Bibs 024-FR235-MW-BK Durable FR 300 denier rip stop polyester with PU coating for superior water proofing-30 degrees cold ratingMid weight 125 gsm insulationseam sealed and fully waterproof and windproofinsulated removable hood with bungee toggleinside waist adjustment2 way heavy duty zipperinside embroidery access zipperinside pocket, 2 front zip and button pockets with storm flap fleece collaradjustable storm cuffs, FR rating and winter rating patches on arm and front of jacketdrop back seatHigh Contrast Reflective Tape for Enhanced Visibility and Compliance. This is a superior replacement for the Viking 3907FRWJ

Designed for extreme cold, this heavy-duty jacket offers unbeatable protection with its -50°C rating and 250 gsm insulation. Featuring waterproof seams, a removable insulated hood, and storm flaps, it keeps you warm and dry. Reflective tape and FR/winter rating patches ensure safety, while adjustable cuffs and a drop-back seat enhance comfort in the harshest conditions. The matching Bibs can be found here Men's Black Heavy Weight Hi-Vis -50 FR Ripstop Waterproof Bibs 024-FR835-MX-BK Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with PU coating for durability and weather protection. Cold Rating: Heavy-duty with a cold rating of -50 degrees, perfect for extreme cold conditions. Insulation: Heavy-weight 250 gsm insulation for superior warmth. Seams: Seam-sealed to ensure the jacket is waterproof and windproof. Hood: Insulated removable hood with a bungee toggle for adjustable protection. Waist Adjustment: Inside waist adjustment for a customizable fit. Zipper: Heavy-duty two-way zipper for ease of use and durability. Embroidery Zipper: Inside embroidery zipper for custom logos or branding. Pockets: Inside pocket for secure storage. Two front zip and button pockets with storm flaps for additional protection. Collar: Fleece-lined collar for warmth and comfort. Cuffs: Adjustable storm cuffs to keep out wind and water. Patches: FR rating and winter rating patches on the arm and front of the jacket for compliance and identification. Drop-back Seat: Extended coverage for added protection. Reflective Tape: High-contrast reflective tape for enhanced visibility and compliance in low-light conditions. LIMITED FIRE RESISTANCE This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks. BLACK MEETS BLACK MEETS This is a superior replacement for the Viking 3957FRJ

This Orange FR Ripstop Waterproof Jacket is perfect for rainy conditions, made with durable, water proof, wind proof ripstop material. Stay dry while on the job. The matching Bibs can be found here  Durable FR 300 denier rip stop polyester with PU coating for superior water proofingseam sealed and fully waterproof and windproofremovable hood with bungee toggleinside waist adjustment2 way heavy duty zipperinside embroidery access zipperinside pocket, 2 front zip and button pockets with storm flap fleece collaradjustable storm cuffs, FR rating patches on arm and front of jacketdrop back seatHigh Contrast Reflective Tape for Enhanced Visibility and Compliance. This is a superior replacement for the Viking 3907FRJO

This Orange Insulated FR Ripstop Waterproof Jacket is perfect for extreme conditions, with a -30 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching Bibs can be found here  Durable FR 300 denier rip stop polyester with PU coating for superior water proofing-30 degrees cold ratingMid weight 125 gsm insulationseam sealed and fully waterproof and windproofinsulated removable hood with bungee toggleinside waist adjustment2 way heavy duty zipperinside embroidery access zipperinside pocket, 2 front zip and button pockets with storm flap fleece collaradjustable storm cuffs, FR rating and winter rating patches on arm and front of jacketdrop back seatHigh Contrast Reflective Tape for Enhanced Visibility and Compliance. This is a superior replacement for the Viking 3907FRWJO

This Orange Heavy weight Insulated FR Ripstop Waterproof Jacket is perfect for extreme conditions, with a -50 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching Bibs can be found here  Durable FR 300 denier rip stop polyester with PU coating for superior water proofing-50 degrees cold ratingMid weight 250 gsm insulationseam sealed and fully waterproof and windproofinsulated removable hood with bungee toggleinside waist adjustment2 way heavy duty zipperinside embroidery access zipperinside pocket, 2 front zip and button pockets with storm flap fleece collaradjustable storm cuffs, FR rating and winter rating patches on arm and front of jacketdrop back seatHigh Contrast Reflective Tape for Enhanced Visibility and Compliance.Class 1 Level 2 CSA This is a superior replacement for the Viking 3957FRJO

This is a superior replacement for the Viking 3907FRP Built for extreme work conditions, these flame-resistant ripstop pants offer waterproof protection, flexible performance, and smart storage. Featuring sealed seams, tool-ready pockets, knee-pad slots, and click-on belt loops. Elastic waistband, boot zips, and reflective tape add comfort, safety, and functionality—ideal for demanding industrial environments and harsh weather conditions. The matching jacket can be found here Men's Black Hi-Vis FR Ripstop Waterproof Jacket 024-FR705-LW-BK Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with a PU coating for durability and weather resistance. Seams: Seam-sealed to ensure the pants are waterproof and windproof. Flexibility: Designed to be flexible and practical for work environments. Waistband: Elastic waist with broad belt tunnels and a fully detachable back for added comfort and customization. Pockets: Two front pockets with storm flaps for protection. Back and thigh pockets, also with storm flaps for weather resistance. Ruler pocket for easy access to tools. Internal knee-pad pockets for additional protection. Belt Loops: Includes belt loops with a click-on function for attaching accessories. Boot Zippers: Zippers at the boots with storm flaps and Velcro closures to keep the cuffs in place and off the ground. Reflective Tape: High-contrast reflective tape for enhanced visibility and safety compliance. LIMITED FIRE RESISTANCE This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks.

This Black Insulated FR Ripstop Waterproof Bibs is perfect for extreme conditions, with a -30 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching jacket can be found here Men's Black Hi-Vis Insulated -30 FR Ripstop Waterproof Jacket 024-FR705-MW-BK FR-treated 300 denier rip stop polyester with PU coating125 gsm insulationseam sealed waterproof and windproofOur most Flexible, and Practical pants yet. Elastic Waist with BroadBelt Tunnel and Fully Detachable Back2 Front Pockets with Storm-flapsBack and Thigh pockets with Storm-flapsRuler PocketInternal Knee-Pad PocketsBelt Loops with Click-On function for additional accessories. Boot Zippers with Storm-flaps and Velcro closures keep your cuff on the groundand in working order.High Contrast Reflective Tape forEnhancedVisibility and Compliance This is a superior replacement for the Viking 3907FRWP

Designed for extreme cold, these FR-treated bibs are perfect for hazardous environments. Rated for -50°C, they provide warmth with 250 gsm insulation, waterproof seams, and reflective tape for visibility. With durable riveted straps, multiple storm-flap pockets, tool loops, and side-leg zippers, they ensure practicality, protection, and comfort in the harshest conditions. The matching jacket can be found here Men's Black Heavy Weight Hi-Vis -50 FR Ripstop Waterproof Jacket 024-FR705-MX-BK Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with a PU coating for durability and weather resistance. Cold Rating: Heavy-duty with a cold rating of -50 degrees, suitable for extreme conditions. Insulation: Heavy-weight 250 gsm insulation for superior warmth. Seams: Seam-sealed to ensure waterproof and windproof protection. Visibility: Reflective tape across the back and chest for improved visibility. Pockets: Side entry pocket for convenience. Two front slash pockets and two back patch pockets for storage. Tool loop for carrying tools. Shoulder Straps: Heavy-duty adjustable elastic shoulder straps, riveted for durability. Waist: Elastic back waist for comfort and flexibility. Zippers: Hip-height side-leg zippers for easy access. Reflective Tape: High-contrast reflective tape for enhanced visibility and compliance. LIMITED FIRE RESISTANCE This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks. BLACK MEETS BLACK MEETS   This is a superior replacement for the Viking 3957FRP

This Orange Insulated FR Ripstop Waterproof Bibs is perfect for extreme conditions, with a -30 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching jacket can be found here Men's Orange Hi-Vis Insulated -30 FR Ripstop Waterproof Jacket 024-FR705-MW-OR FR-treated 300 denier rip stop polyester with PU coating125 gsm insulationseam sealed waterproof and windproofOur most Flexible, and Practical pants yet. Elastic Waist with BroadBelt Tunnel and Fully Detachable Back2 Front Pockets with Storm-flapsBack and Thigh pockets with Storm-flapsRuler PocketInternal Knee-Pad PocketsBelt Loops with Click-On function for additional accessories. Boot Zippers with Storm-flaps and Velcro closures keep your cuff on the groundand in working order.High Contrast Reflective Tape forEnhancedVisibility and Compliance This is a superior replacement for the Viking 3907FRWP

This Orange heavy weight Insulated FR Ripstop Waterproof Bibs is perfect for extreme conditions, with a -50 degree rating and durable, water proof, wind proof ripstop material. Stay warm and dry while on the job. The matching jacket can be found here Men's Orange Heavy Weight Hi-Vis -50 FR Ripstop Waterproof Jacket 024-FR705-MX-OR FR-treated 300 denier rip stop polyester with PU coatingHeavy duty -50 degrees cold ratingheavy weight250 gsm insulationseam sealed waterproof and windprooftape across back and chest, improving visibility. Side entry pockettwo front slash pockets and two back patch pockets, Tool loop,Heavy-duty adjustable elastic shoulder straps are riveted fordurability, Elastic back waist, Hip height side-leg zips, HighContrast Reflective Tape for EnhancedVisibility and Compliance This is a superior replacement for the Viking 3957FRPO

Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire-resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 0.50mm Fluorescent PU Flame-resistant material with 8000mm water-resistance 4” Heat transfer reflective tape with contrast fluorescent configuration Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M CSA Z96-15 Class 2 Level 2 Class 2 Level FR

Stay safe and visible in any weather with our Fire Resistant Hi-Vis Safety Rain Jacket. Waterproof and durable with welded seams, it features a detachable hood with visor, vented underarms, secure storm cuffs, and practical front snap pockets. 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance  2” Heat transfer reflective stripes on the front and back Waterproof, heat sealed with welded seams Vented underarms, elastic storm cuffs Detachable fold-away hood with visor Adjustable drawstring on hood  Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M  CSA Z96-22 Class 2 Level 2 Class 2 Level FR 

Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire-resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 0.50mm Fluorescent PU Flame-resistant material with 8000mm water-resistance 4” Heat transfer reflective tape with contrast fluorescent configuration Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M CSA Z96-15 Class 2 Level 2 Class 2 Level FR